VIRPIL MT-50CM3 first impressions and your questions answered

This is part two of my three-part series reviewing the VPC MongoosT-50CM3 Throttle throttle. I’ve been using the new throttle for a couple of weeks now and it’s time to put together some of my first impressions.

From out of the box to first flights

The first thing that strikes me about the CM3 throttle is the size. Compared to the first-generation MT-50 or the similarly sized Thrustmaster Warthog, the CM3 is significantly smaller and somewhat lighter as a result. The size and weight always made me a bit nervous with my other throttle on the mounts that I have and so the reduction in size feels like a good thing.

Part of the reason for this is the reconfiguration of the controls on the throttle and having a few less buttons and dials on the base unit. This is done partly because of size but also because of an emerging pattern in higher end flight sim hardware where the throttle unit has tons of functionality but an additional panel unit can be added on with custom controls. VIRPIL has two control panels available that can be paired with the throttle to provide for a ton of extra options.

Although I already feel the loss of a couple of controls on my old throttle, there are so many new controls on the throttle handle itself that I’m finding this to be a fair trade. VIRPIL did not skimp on the number of four way plus push hats and there’s a couple of extra rotary controls and a two way plus push button on the grip that more than make up for what I may have lost. In-fact, after a little thought behind the setup, I now have an even more ergonomic setup.

The feel on the throttle itself remains outstanding with the kind of weight and fine adjustability that VIRPIL throttles are known for. It’s always been immensely satisfying to push the throttle forward into full power on any aircraft from WWI bi-plane to modern fighter jet to airliner. The weight is enough to give you fine control while being manageable in tense situations where you need rapid control changes. The ultimate tests are carrier landings and aerial refueling where you need to constantly make adjustments forward and back. This throttle handles those with confidence and it never sticks or hesitates in these situations.

No issues across multiple sims

I’ve already flown with this throttle on three sims: IL-2: Great Battles, DCS World and Microsoft Flight Simulator. All of these sims have access to the full range of controls here and I haven’t found many issues with setting up controls the way I want them to be setup.

The toggle wheels on the throttle work well to configure altitude and VS controls in Microsoft Flight Simulator, the various hat switches are immensely useful in DCS World, and all of the buttons are great to have to manage those World War II aircraft of both DCS and IL-2.

There is one exception to the ease of configuration. The four momentary toggle switches are configured, out of the box, to be just one button. You can, however, reconfigure to make it two buttons (so up is gear up and down is gear down or up is supercharger stage 2 and down is supercharger stage 1) and I’m going to have to look up how to do that as I’ve configured it that way on my first gen throttle but forgotten where in the software I do that for this new one. I’ll have that sorted out by the time I write the full review.

I’ve also been using the throttle to fly the brand new DCS: Mi-24P Hind for DCS World. I have not reversed my throttle for this and set it up like a traditional helicopter collective, however, some of you have asked me about using it this way and how they might interact with the detents. I will try that out before the full review.

Your questions

I’ve been asked a few questions about the CM3 and how it can be used so let me attempt to answer some of those questions now with a few more to be tackled during the full review.

One question I was asked was if the throttle can be used on the right side rather than the left. The answer I’m going to give is no. The three hat switches and two buttons on the right side of the throttle are ideally manipulated by the thumb and reversing that puts those controls near your pinky switch – but not ergonomically.

Another question I was asked was about VR usability and the answer I have for that is – yes, mostly. Each hat switch and button on the throttle has its own unique feel and that means that you can very easily and quickly feel for the appropriate button. What is a bit harder are the buttons on the base of the throttle which don’t have the same kind if unique design. You can still feel for them most of the time and that makes it reasonably good to work with in VR.

I also think that the usability there is good even for those without VR like myself. You don’t want to fumble for controls in the middle of a tense flight situation. You want to put your thumb on that hat switch or control dial and just know what it is. This throttle excels at that.

Someone else asked about reliability. I know there are some concerns in the forums and that is a legitimate issue. There are issues with reliability on some of the first-generation units but with this being the fourth generation, my hope is that VIRPIL has been able to take their iterative design method and improved everything along the way. My review might not be able to fully answer this question for you but I can report on how well it works over the next few weeks.

More to come

I like to take my time with hardware reviews and so I’m planning to spend more time with this throttle flying it with other sims and in other situations. I’m also going to get into detail with the detent system as that is a major feature of this new throttle and it comes with customization that we’ve never seen before. That’s all to come!

12 Comments Add yours

  1. Dmitriy Kozyrev says:

    Thank you for the review!
    Guess I’ll have to learn flying with the left hand on the throttles. Although the previous attempt ended in a total failure 🙂

    Like

    1. ShamrockOneFive says:

      I wish you luck!

      Liked by 1 person

    2. LD88 says:

      Do a browse for “GVL throttle”…. Makes a buch of custom throttles including left hand. If looking in youtube, expand the notes area for English translations. I’ve heard excellent reviews of those who bought his stuff…

      Liked by 2 people

      1. ShamrockOneFive says:

        That’s a great suggestion LD88! I’ve never seen one in person but it is worth a look!

        Like

  2. Gretsch_Man says:

    Mine finally arrived here last week (together with a new Virpil flight stick – YES!).

    Coming from the X56, so far I’m very happy with the Virpil throttle. There is a lot of functionality integrated. Plus it feels very satisfying and of high quality.

    I can’t speak for the Warthog throttle, but I would recommend the MT-50MC3 throttle without any hesitation.

    Liked by 1 person

    1. ShamrockOneFive says:

      Great news and glad you’re enjoying it so far! Yeah the MT-50CM3 really feels solid when you’re using it which is terrific.

      Like

  3. wagmatt says:

    This is my current throttle for day to day use (work and play). A great piece of kit that is very versatile for fixed and rotary wing.

    – Wags

    Liked by 1 person

    1. ShamrockOneFive says:

      Hey Wags, thanks for the comment! I am finding the versatility extremely useful with this throttle including with the latest Mi-24 helicopter release.

      Like

  4. CanadaOne says:

    How is it for ordering and delivery in Canada?

    Like

    1. ShamrockOneFive says:

      I should note that this one was shipped as a review unit, however, I have ordered parts from VIRPIL before and had few issues. Canada now has a trade agreement with the EU which seems to be speeding parts along from the factory in Lithuania.

      Like

  5. CanadaOne says:

    I’m a bit wary about delivery times and strange custom/brokers fees. I tend to stick with Amazon for PC parts and devices. Evil though they may be, I never get bad surprises from them.

    Like

    1. ShamrockOneFive says:

      I did pay brokerage for my first gen VPC throttle but I didn’t for my MFG Crosswinds which I ordered and received about 6 months ago. That one seems to be a bit of a wild guess as to what happens.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s